Reduction of waste rate in CTP platemaking

In recent years, "CTP" technology has become a hot topic in major print media. Domestic powerful companies have also introduced CTP plate-making equipment to establish a corporate image and improve their competitiveness. However, having the most expensive and most advanced equipment is just a good reputation. For companies that own CTP plate making equipment, the most practical thing is to reduce costs and create maximum profits.

The company's Xi'an Coal Navigation Map Printing and Printing Company introduced the Heidelberg CTP plate making equipment in October 2001. From equipment installation and commissioning to scale production, the author had the privilege of always fighting in the front line and was deeply impressed by the fact that Production cost is an effective way to use CTP equipment to maximize profits.

For an independent accounting platemaking shop, the cost of a CTP plate-making process is much higher than that of the film-making process, if only from the perspective of material use. The process of our company's film making process is: film output→printing and printing→dyeing and proofing; the CTP plate making process is: digital proofing→patching→changing→CTP output. CTP version 100 yuan / Zhang, film 53 yuan / m2, renewable PS version of 20 yuan / pair open, high gloss photo paper is 6 yuan / m2 calculation, with a set of large four-color live (87cm x 57cm) as an example The cumulative cost of consumables for the film process is: 0.87 x 0.57 x 4 x 53 (film) + 4 x 20 (plate) = 185.13 yuan; and the cost of the CTP process is: 0.87 x 0.57 x 6 (digital proof) + 100 x 4 (plate material) = 402.98 yuan.

From the above data, it can be seen that the cost of the CTP plate making process is more than 2 times higher than that of the film plate making process. The main reason for this result is the high price of the CTP plate material. At the present stage, the CTP plate used by our company (Kodak Bolilite's plate) still relies on imports. Although we can not reduce the cost in terms of price, we can minimize the waste disposal rate in each production and fully reflect the CTP plate making. The advantage of the network is to attract customers with advantages such as high copying precision, rich image layers, and shorter operating time, which creates profits for the entire company (in fact, if the cost of the integrated printing shop plate, the CTP plate making process and the film making process The cost is almost equivalent).

In the past year, the author has accumulated some methods to reduce the scrapping rate and make up the version. I would like to share it with my colleagues.

1. Keep the PS version clean and flat

Topsetter102 is an external drum type plate making machine, which requires particularly high cleanliness and flatness of the plate material, especially when it comes to the work of the frequency modulation network. In the initial period of CTP use, the gradation hopping phenomenon often occurs on the flat screen when working out the frequency adjustment network. (A small area with a deeper level is visible to the naked eye. Observable under the magnifying glass is that the network is significantly denser than the surrounding area.) . Excluding the cause of the document itself, after repeated experiments and analysis, it was finally found that dust or irregularities on the plate resulted in uneven heat absorption during exposure, resulting in uneven thermal cross-linking reactions.

For these reasons, we require that the operator must wear clean work gloves when loading CTP plates. After vertically pulling the printed materials from the plate, it should be placed directly at the entrance of the Topsetter 102. It must be prevented from being folded during shipping. (Our company uses Kodak Poly Lighting's Graphics0770×1030 plate, thick> only 0.3mm, very easy to fold).

2. Addition and deletion of content on a plate

Although the customer's sample proofs for digital proofing have been signed and used by the CTP system before outputting the plates, and the quality inspectors have also conducted strict proofreading, there are still problems with the contents of the individual printed materials inevitably after the plates have been printed. For example, sometimes there is a lack of one or two field content (such as lines, punctuation marks, etc.) with a dot percentage of 100%. If there is no color fit, the plate will not need to be re-used. The following method can be used to make up: First wipe off the protective glue on the printing plate, mark it on the printing plate with a squeegee (use a moderate force), and then put on the ink, and then wipe on the protective glue (but this edition cannot exceed 3,000 prints).


If there is any extra content on the plate, if it does not involve color fitting, it can be repaired with Xingguang PS plate version, wiped clean with water, and then wipe with peach gum.

3. Dirty processing of printing plates in the publishing process

The plate used by Topsetter102 is a thermal CTP plate. When the temperature exceeds the critical value during exposure, a cross-linking reaction occurs in the image and the latent image is formed. During development, this portion is insoluble in the developer while the unexposed blank portion of the resin The layer dissolved in the developer because no cross-linking reaction occurred. After a certain period of time after a certain amount of plate material has been developed, a portion of the resin layer in the developer solution will form a lot of floc and adhere to the finished plate material. If it is not treated, it will cause the printing to be dirty. The solution is: 1 often cleaning, replace the filter core of the processor; 2 before booting the printing plate, thoroughly clean the developing machine, especially the rollers in the developing machine; 3 for floating on the plate, available Clean water first wipe off the protective rubber, use a small brush, dipped in a little developer liquid, and gently wipe it with clean water. Repeatedly, it can be removed (note that the dwell time on the plate must be short, otherwise it will Injury the small outlets around, and then wipe the protective gel.

4. Insufficient processing of plate development

When the developer (Kodak Premium CTPPositive Developer) is fatigued, for the Kodak PolyVision Graphics0770×1030 plate, the blank part of the layout will be blue and the upper machine belt dirty. For this type of media, secondary development can be carried out to meet the printing quality requirements (but should pay attention to the development conditions, we usually adjust the development time, brush speed to twice the original, and must detect changes in the printing plate Internet point ).

In order to maximize the use of developer, while ensuring the quality of the printing plate, according to the fatigue of the developer, we can make up for the following two methods: 1 adjust the plate calibration curve value; 2 increase the development time or the development temperature or Increase brush speed.

All of the above methods can effectively reduce the scrapping rate in CTP plate making, thus reducing the cost of CTP plate making.


Slide Card Blister Packaging

1. Save raw materials ,light weight, easy to transport ,the Slide Card Blister Packaging is good sealing performance, in line with the requirements of environmental protection green packaging ;

2. The Slide Card Blister Packaging is able to packaging any abnormity product ,without using the buffer material ;

3. Be transparent packaging products ,beautiful appearance, easy to sales, and the Slide Card Blister Packaging is suitable for mechanized automatic packaging ,with modern management ,save manpower and improve efficiency .

4. In the process of Slide Card Blister Packaging  commonly used materials : PP, PET ,PVC,PE etc.

In addition to slide card blister backaging,we also supply disposable blister box,clear plastic clamshell blister pack.

Slider blister packaging, plastic blister packaging

Custom design hanging Sliding Card Blister Packaging


Slide Card Blister Packaging

Slide Card Blister Packaging,Pet Slide Card Packaging,Pvc Slide Card Packaging,Usb Slide Card Packaging

Shenzhen City Wing Kam Packaging Products Co., Ltd. , http://www.blisterpackagingsupplier.com