The key factor that affects the quality of the printing plate is the hardness of the printing plate. The higher the hardness, the smaller the elasticity of the printing plate, the shorter the service life of the printing plate, the higher the definition of the graphic dots, and the small compression deformation of the dots, but due to the excessive pressure support The corrugation has been damaged to varying degrees, so the compressive strength of the carton is weakened. The lower the hardness of the printing plate, the greater the elasticity of the printing plate. The printing plate has good printing resistance, long life and full contact with the rough printing surface. Make the printed product fully inked, but the amount of dot deformation is large and affects the quality of the printed product. Therefore, the selection of the plate material and hardness of the printing plate is a guarantee of quality.
Magnet Light Box,Bus Stand Sign,Station Sign Led,Subway Station Sign Led Chengdu GodShape Sign Co., Ltd , https://www.signsgs.com
Magnet Light Box
FAQ
Q: Are you a trading company or factory?
A: We are factory.
Q: What is the MOQ?
A: No MOQ required normally, that means you can always ask for a sample first. But remember the sample freight is at your own cost.
Q: Do I have to have a design to inquire?
A: Yes! A well made design/artwork is the most helpful thing to get an exact quote. However, if you really do not have a design...just let us know your idea, we'll cover it.
Flexographic printing plate material and hardness are the guarantee of quality
In flexographic printing, a solid photosensitive resin plate should be selected, which has good ink transfer performance and large tolerance. It has the advantages of high reproduction accuracy, good stability, wear resistance and no deformation, long service life and convenient processing. It has been widely used. The hardness of the plate should be selected according to the printing process and the hardness requirements of different graphics and text. The hardness of the plate is at HS32-35, and the hardness of the small print and dot printing plate is at HS37-42.