"Original" vs "Pseudo-original" Three strokes to eliminate the selection of the second-hand wardrobe

[ Chinese wardrobe network ] The overall wardrobe is an emerging industry, consumers do not understand the quality and environmental protection of the panels used by each manufacturer. Many small factories and black-hearted businesses have seized the opportunity to confuse the market and use the inferior non-environmental plates and hardware to pretend to be the brands of regular manufacturers for sales. As a result, everyone expressed doubts about the entire industry. In fact, the materials used by regular manufacturers are environmentally friendly, and the environmental protection boards used can meet the European E1 environmental standards.

Here are a few ways to quickly identify the authenticity:

First, look at the sample (not the finished sample cabinet)

Usually the template is sealed on three sides, leaving a side to show the quality of the substrate. First, scratch it with your fingernails to see if you can scrape the powder. If you can, you can't buy it, no matter how cheap the price is, because such a board will be severely deformed or even broken after encountering a humid environment.

If you can't scrape the powder, go to the next checker and smell it with your nose to see if there is any pungent smell (smelly socks). If it does, it means that the formaldehyde content is too high, it will cause great harm to the human body. buy.

If not, look at the veneer (that is, the glossy surface of the plate) and touch it by hand to see if it is very flat and the texture is very neat and clear. Generally, high quality panels have a higher surface gloss. It feels good and the texture is very clear. Regular manufacturers usually have anti-counterfeiting marks printed on them and can be seen with the eyes.

Here to explain the material of the veneer, the most commonly used on the market is the melamine sticker. This veneer is relatively stable in physical and chemical properties, has the advantages of moisture resistance, acid and alkali resistance, is not easy to deform, and the melamine decorative panel No need for finishing treatment such as painting, it also reduces the possibility of surface cracking. If the environmentally friendly melamine plate is used as the substrate, the volatilization of harmful gases can be reduced.

The last is to look at the edge, the quality of the edge is related to the quality and effect of the overall cabinet. Most of the plates produced by regular manufacturers use imported edge banding machines, and the quality of the edge banding is very high. If you don't look at it, you can't see the interface between the two pieces. The strength of the plate is very strong, and it is difficult to separate it with a knife. There is also a security mark on the edge of the regular manufacturer (consistent with the panel). The above processing can not be done by OEM.

Second, look at the packaging (if you sign a contract with the merchant, the merchant guarantees that the original goods, you must ask for the logistics freight bill)

In this way, you can know whether the merchant has carried out the package. After seeing the goods, the original packaging paper has the brand logo and the order number. Through the logistics list and wrapping paper, it can be distinguished whether it is processed by OEM. (These are required to be stated in the contract when signing the contract in the later stage, and the merchant has not been recognized.)

Third, look at the hardware

This is the easiest place for OEMs to make fakes. They often use some inferior hardware to impersonate original hardware or well-known brand hardware. Regular manufacturers do very fine anti-counterfeiting of hardware, from a small connector to a drawer guide that has the same anti-counterfeiting mark as the cabinet. Therefore, viewing small hardware can quickly distinguish whether it is produced by regular manufacturers.

Zebra Blinds

Zebra Blinds are Very decorative and also functional Day & Night fabrics consist of transparent and darkening strips. Overlapping two layers of fabric and moving them in relation to each other gives a wide range of possibilities to regulate the degree of insolation or darkening a room. Besides depending on a colour it may protect household members' privacy after dark.  

Characteristics of Fabrics:

impregnated fabric resistant to dust.

Zebra Blinds

Horizontal Zebra Blinds,Black Zebra Blinds,Skylight Zebra Blinds,Vertical Zebra Blinds,D&N Zebra Blinds

Dongguan Xindayuan Window Covering Products Co., Ltd. , http://www.xyndaxchina.com