GRB type high-grade aniline printing ink is suitable for general commercial rotary aniline printing machine. It provides high light brightness, high printing color, strong freezing resistance, strong water resistance, good adhesion, and suitable for different packaging plastic films. Second, characteristics 1, especially suitable for low-viscosity printing and high gloss and strong surface color plastic packaging printing. Third, to adapt to the type of printing machine can be widely used in different printing speeds from 10 meters to 100 meters per minute, the ink can be completely dry, and can be used for traditional rubber relief or new photosensitive resin plate. IV. Solvent Dilution 1. Ink should be added with proper amount and appropriate solvent when it is used. Although applicable diluents are available in the market, it is recommended to use our company's standard thinner for best results. Precautions: Source: Shanghai Wangyu Industrial Co., Ltd.
First, printing substrate 1, surface-treated low-density polyethylene, polypropylene and polyolefin films.
2, cellophane, cellulose film.
3, paper aluminum foil, aluminum polyvinyl chloride.
4, polyester film.
2, excellent flexibility and adhesion.
3, wear, the surface is not easy to scratch.
4, excellent resistance to freezing and water resistance.
5, odorless, suitable for general food packaging.
6, excellent pressure viscosity is not easy to have pressure due to bottom or off the end of the phenomenon.
7, excellent printing and stability.
2, depending on the speed of printing, the recommended ink printing viscosity:
White ink: Zahn No. 2 Viscosity Cup 25°C 20-24 seconds Color ink: Zahn No. 2 Viscosity Cup 25°C 22-26 seconds 3. Improper use of solvents can destroy ink's advantages such as gloss, color, etc. , And seriously make the rubber printing plate and photosensitive resin rise and break.
This series of inks is not suitable for use with high heat or grease.
GRB type plastic advanced flexo printing ink