Shopping Ortote Ordrawstring Bag Shopping Bags,Large Shopping Bag,Reisenthel Shopping Bag,Drawstring Bag Ningbo Fineweather International Trade Co., Ltd. , https://www.fwsbag.com
How to print self-test page for label printer OCBP-005
How to Print the Self-Test Page on the OCBP-005 Label Printer
The OCBP-005 is a widely used thermal label printer produced by OCOM. It's commonly found in logistics, retail, and manufacturing environments where accurate and fast printing of labels is essential. One important feature of this printer is the self-test page, which provides key information such as the printer’s default IP address, paper size settings, and network configuration details. This information is crucial when connecting the printer via Ethernet or troubleshooting connectivity issues.
To successfully print the self-test page, it's important to use the correct label paper size. The factory default paper width for the OCBP-005 is 76mm. If you use a label that is smaller than this, the printed content may exceed the paper’s boundaries, causing the printer to stop mid-print due to sensor detection. To avoid this issue, it's recommended to use 80mm thermal label paper when printing the self-test page. This ensures that the entire content fits properly and the printer operates without interruption.
Printing the self-test page is a simple process. First, turn off the printer. Then, press and hold the "FEED" button. While holding the button, turn on the power switch. After about two seconds, release the "FEED" button. The printer will then automatically print the self-test page.
This process allows users to quickly retrieve important printer settings and verify the functionality of the device. Whether you're setting up a new printer or troubleshooting an existing one, the self-test page is a valuable tool for ensuring proper operation. Always make sure to use the correct paper size and follow the steps carefully to get the best results.