Packit Lunch Bag,Best Cooler Bag,Rtic Cooler Bag,Backpack Cooler Bag Ningbo Fineweather International Trade Co., Ltd. , https://www.fwsbag.com
How to print self-test page for label printer OCBP-005
How to Print the Self-Test Page on an OCBP-005 Label Printer
The OCBP-005 is a widely used thermal label printer produced by OCOM. It’s commonly used in logistics, retail, and manufacturing environments due to its reliability and high print quality. When setting up or troubleshooting this printer, printing the self-test page can be very useful. This page provides essential information such as the printer’s default IP address, paper width settings, and other critical configuration details.
If you're connecting the printer via Ethernet, the self-test page will display the default IP address, which you can then add to your local network for remote access. It's important to note that the factory default paper width for the OCBP-005 is 76mm. To ensure the self-test page prints correctly, you should use thermal label paper that is at least 80mm wide. Using paper narrower than 76mm may cause the printed content to go off the edge of the label, triggering the printer’s sensor to stop the print process.
To print the self-test page, follow these steps:
1. Turn off the printer.
2. Press and hold the "FEED" button.
3. While holding the "FEED" button, turn on the power switch.
4. After about 2 seconds, release the "FEED" button.
This will initiate the self-test printout. The printed page will include all necessary information for configuration and troubleshooting. Always make sure to use the correct paper size to avoid any printing errors. Whether you're setting up a new system or diagnosing an issue, the self-test page is a valuable tool for working with the OCBP-005.