Shangyuzhuang Instrument Co., Ltd. specializes in producing all kinds of experimental equipment. It is a company integrating R&D, production and sales. The company specializes in the production of various types of experimental equipment, of which the application of constant temperature water tank is quite extensive, the following describes the use of the constant temperature water tank. First, the method of use: Welcome to inquire Shanghai Xinzhuang Instrument Co., Ltd., we have professional staff to explain the service for you. Stainless Steel Pot Series,Stainless Steel Stock Pot,Composite Bottom Double-Flavor Hot Pot,Stainless Steel Soup Pot Jiangmen Xinweijie Stainless Steel Products Co., Ltd. , https://www.xxdkitchenware.com
The constant temperature water tank can be used by the testing departments of medical institutions, colleges, scientific research, chemical industry, printing and dyeing industries for distillation, drying, concentration and constant temperature heating of chemical and biological products, as well as the use of boiling and disinfecting equipment.
2 Product Features
1. The thermostatic water tank shell is made of high quality electrostatic spray.
2. The inner liner and upper cover are made of high quality stainless steel, which is corrosion resistant and easy to clean.
3. The heating method is “U†type immersion electric heating tube heating.
4, using advanced electronic technology, intelligent temperature control, high temperature control accuracy.
3 Technical parameter model Temperature control range (°C) Temperature control accuracy (°C) Power (W) Working size (mm) Dimensions (mm)
HH-420 room temperature ~ 100 ± 0.5 ° C 1000 420 × 180 × 200 610 × 270 × 270
HH-600 room temperature ~ 100 ± 0.5 ° C 1200 600 × 300 × 210 790 × 380 × 290
When using the constant temperature water tank, you must first add water to the water tank, then turn on the power, then turn the temperature selection switch to the setting end, adjust the temperature selection knob, observe the digital reading and set the required temperature value (accurate to 0.1 °C). When the set temperature value exceeds the water temperature, the heating indicator light is on, indicating that the heater has started to work. At this time, the selection switch is turned to the measuring end, and the digital display shows the actual water temperature. When the water temperature reaches the water temperature you need, the constant temperature indicator lights up. The heating indicator is off. At this time, the heater stops working. Because the water in the water tank is stationary, there is a certain difference between the water temperature and the upper and lower sides. It needs to be heated, and the water temperature can be constant after the constant temperature conversion.
Second, use and maintenance A: Inject a proper amount of clean tap water into the studio water tank, and place the container.
B: Turn on the power.
C: Select the constant temperature: turn the temperature "set-measure" selector switch to "set", adjust the temperature control knob, and display the desired set temperature digitally. Turn the temperature "set-measure" selector switch to "measure" Where, the number shows the actual temperature of the working water tank. (The red indicator light is on, indicating that the heater is working).
D: After the work is finished, set the temperature control knob to the minimum value and cut off the power.
E: If the water bath is not used for a long time, the water in the studio water tank should be removed, wiped clean with a soft cloth and dried.
F: It is forbidden to use the heater in the waterless state of the water bath.
Product introduction and use method of constant temperature water tank