[China Packaging Network News] In the production process of the company, the folding lid sealing machine plays a crucial role, significantly reducing manual labor and boosting overall efficiency. As more companies adopt automated packaging solutions, the use of box sealing machines is becoming increasingly common. But how exactly does a folding lid sealing machine operate? Here's a detailed guide from Jiajun Xiaobian: 1. First, install and wrap the tape, ensuring it is centered properly for smooth operation. 2. Adjust the air pressure to the appropriate level for optimal performance. 3. Check the water separator for any accumulated water and drain it if necessary. Also, ensure that the lubricating oil is sufficient; if not, refill it promptly. 4. Adjust the position of the side rollers to align correctly with the carton during the sealing process. 5. Set the swing lever to the correct position so that it can effectively assist in folding the lid. 6. Press the ON button to power up the machine and start the operation. 7. Place the carton at the input end of the machine, making sure the top cover is upright. Once the conveyor belt moves the carton forward, release your hand. When the carton reaches the rear cover control switch, the cylinder piston extends, pushing the lid upward. As the carton passes the fold control switch, the rear cover switch resets, causing the piston to retract. The rear lid then drops down, pressing the back cover of the carton. Meanwhile, the swinging rods on both sides fold the side covers into place, completing the entire lid folding and sealing process. Finally, the tape dispenser applies the sealing tape to finish the job. 8. The sequence of folding is as follows: first the front cover, then the rear cover, followed by the left and right side covers. 9. After completing the task, press the OFF button to turn off the machine and stop its operation.
Tape For Eye Lift,Lash Extension Tape,Tape For Lash Extension Shenzhen Nanfang Shishang Cosmetic Utensil Co., Ltd. , https://www.sznfbrush.com
Fold sealing machine correct operation detailed
Eye lash Tape
How to use eyelash tap (Micropore Non-woven Eyelash Extention Tape Lash Tape):
1. Clean hands with professional hand sanitizer.
2. Take two sections of waterproof eyelash tape, length 4cm, cross 120 degrees
3. Go to the viscosity of intersections
4. Stick the unglued sides of the lash lift tape onto the eyelashes
5. Curl your upper lashes
6, stick to both sides of the upper eyelid and fix, make sure the upper lashes are completely fixed
7. Take 2 sections of 3cm eyelash extension tape and 2 sections of 3cm waterproof non-woven eyelash tape to remove adhesive tape
8, first stick non-sensitive tape, stick under the lower eyelashes (do not stick to the lower eyelashes)
9. Stick waterproof tape on non-sensitive tape (exposing lower eyelashes)
10. Clearly separate the upper and lower eyelashes to ensure convenient operation when grafting the lower eyelashes