[ Chinese Wardrobe ] The walk-in cloakroom originated in Europe and is a separate room for storing clothes and changing clothes. It can store family clothes, shoes, hats, bags, accessories, bedding and so on. In addition to the locker, it usually includes a Dressing Table, a Dressing Mirror, a take-up ladder, an ironing board, a clothes rack, and a seat. The ideal cloakroom area is at least 4 square meters. The inside should be divided into hanging storage area, stacking area, underwear area, shoes and socks area and bedding area and other special storage space. It can be used for family comfortably changing clothes. Several points in the walk-in cloakroom selection cabinet 1. Look at the quality of the cabinet, the most important thing is to look at the edge of the board, the machine edge is generally uniform, and the hand-sealing will have some rough, large furniture factories generally use machine edge. 2. For the price of the cabinet, first ask the manufacturer's calculation method, and then ask the items included in the cost, such as whether or not the drawer is included. (The usual area algorithm does not include the cost of the drawer. The algorithm for the projected area may or may not contain ), whether it includes the cost of the backplane, etc. 3. Choose a cabinet, you must choose a brand, a brand of cabinets, the quality is guaranteed, and some small manufacturers use a few boards to make do-it, you can sell as a wardrobe , such a manufacturer has a problem and then look for it, I am afraid Difficult. Structural design and door cooperation Professionals reminded that when designing the combination wardrobe, pay special attention to the cooperation between the cabinet structure and the door. First of all, whether it is for the manufacturer or the decoration company to make the cabinet, the position of the drawer must be determined by the manufacturer who makes the door. Generally, the drawer should be reserved for a certain distance. This distance is determined by the position of the door, so that it will not be played. Do not open the door, or do not open the drawer. Secondly, the side panels on both sides should have enough fixing plates to support it to avoid deformation of the side panels. For example, a small cabinet for socks and sundries can be designed on one side of the side panel instead of the inner side, so that the side panel can be reinforced. Third, the span of each cabinet should not be greater than 1 meter, that is, the distance of 80 to 90 cm is most suitable, otherwise the long board is easy to bend and deform. Solid Wood Bed ,Solid Wood Bed Frame,Solid Wood Platform Bed,Solid Wood Bunk Beds shandong Changheng Wood Co.,Ltd , https://www.changhengwood.com
Step-in cloakroom cabinet selection points