Back to Nantian clothing how to prevent moisture, a few coups to drive away the mold

[ Chinese wardrobe network ] "Back to South Heaven" when the madness. The ground is wet everywhere, and the walls are constantly "sweating." Even the clothes in the closet are not spared. Heavy moisture, a musty smell. The clothes are moldy and tidy, and wearing them can cause illness. And those high-end clothes are moldy and heartbreaking. Is there any way to ensure that the clothes are not difficult to encounter?

1. Desiccant supplies such as desiccant come in handy

The most common absorbent products on the market generally contain calcium chloride particles as the main content, and most of them also add flavor ingredients, which can integrate dehumidification, aroma, anti-mildew, deodorization and other functions. The moisture absorbing box is mostly used for moisture absorption of the wardrobe and the shoe cabinet, and only needs to be put into the cabinet when in use.

The general hygroscopic box is divided into two layers, the upper layer is calcium chloride particles or other dehumidifying agent, and the lower layer is the water storage space. This device is more suitable for being placed in a closet or a storage room. If the box is filled with water after a period of time, At this time, it is necessary to replace the new absorbent box.

2, different materials have different countermeasures

Cotton clothing:

Cotton clothes are easy to absorb water. They can be sealed in a waterproof bag made of film plastic or nylon and stored in a closet, and a small amount of desiccant is placed, during which the frequency of opening the wardrobe is reduced. Once wet, small pieces of clothing can be dehydrated by a washing machine and then blown dry with a hair dryer; large pieces of clothing can be washed in a dry cleaner and dried by a professional dryer. And high-end clothes are damp, it is best to dry immediately to prevent further moisture.

Leather products:

Suede clothing is generally made of animal skins such as scorpion, fox, mouse, sheep, donkey, raccoon, etc. If the fur is inadvertently wet or stained, it must be treated in time, wipe the water with a dry cloth, and then It is placed in a dry, ventilated place to dry.

In the process of wearing and storing leather coats, the most fear is moisture. Especially when the skin of the fur is in contact with water, it is easy to mold, easy to rotten and easy to lose hair. The lightest effect will also harden the skin. When the fur is wet or damp, do not use fire or iron to avoid shrinkage, hardening, or even cracking.

It is necessary to dry the clothes in a dry place, and then smooth the fluff with a soft brush, so that the original look of the suede garment can be restored.

Before the coat is stored, it is necessary to dry it and let it dry for 2-3 hours. When drying, pay special attention to the fur should not be directly exposed to sunlight, it is best to cover a layer of cloth to ensure the luster of the fur; otherwise, exposure to sunlight will make the skin hard and aging, making the cortex lose its elasticity.

At the same time, it is not possible to directly press the heavy object on the clothes, which is easy to cause deformation. It is best to take out the clothes and dry them before the rainy season, and ventilate them to disperse moisture to prevent mold and insects.

3. Drying with a dryer

If you find signs of dampness, take the clothes out of the closet and hang them in a ventilated place to prevent further dampness. If you have a dryer at home, you can dry them. If there is no drying equipment at home, you can use them. Dry hair dryer;

If you find that the clothes have been mildewed, you should immediately send them to the dry cleaners. Because the clothes are just mildewed, they can be completely removed. If the molds penetrate into the fibers of the clothes, it is difficult to remove them.

A few tricks for indoor moisture:

Spread the newspaper. Avoid opening doors and opening windows, and draping newspapers on the floor and on the table to absorb moisture.

Dried chili, cannon, brazier. The folks have traditionally used traditional moisture-proof practices. One is to place dried peppers, which can absorb a certain amount of water, but must always replace the new dried peppers; the other is to place reliable quality guns, because the shells have sulfur, not only dehumidification but also Can be removed.

However, experts have warned that although the "earth side" has a good effect, it is as safe as a gun, and the public is still careful when using it. In addition, you can also burn a pot of fire in the room to increase the temperature inside the room, so that the water vapor can not condense, thus reducing the indoor humidity.

Candlelight. The candle can make the water vapor unable to condense, thus reducing the indoor humidity. If you have a musty smell at home, you can use a candle with natural plant aromatherapy oil, which can both dry the air and remove the musty smell in the room.

Mopping the floor with hot water and salt. This method can accelerate the evaporation of water. After the ground is finished, some waste cardboard boxes or newspapers are placed at the door of the house to reduce the moisture in the sole.

Use equipment. Use a dehumidifier, air conditioner or heater. At present, the dehumidification products on the market mainly include air conditioners, dehumidifiers, and heaters. The air conditioners used in general households have the function of dehumidification.

Blowing the north wind. Open the doors and windows when blowing north wind. More than 80% of the returning to the south is due to the cold air going south. If the weather forecast says that there is cold air going south, the local wind direction turns to the north, you can safely open the doors and windows to ventilate.

Lime absorbs moisture. Small spaces such as washrooms and bathrooms can be wrapped in a bag of quicklime to absorb moisture. You can also poke a few holes in the washing powder bag and use the washing powder to absorb moisture.

Back to Nantian, you need to pay attention to these:

Do not open the south window at noon. It is necessary to close the doors and windows in advance, first prevent and cure, and prevent the outdoor warm and humid airflow from entering. Some people think that the sun is shining at noon and they can open the window to ventilate. This does not relieve the humidity. At noon, when the outdoor temperature is the highest, the indoor and outdoor temperature difference is also the biggest. At this time, ventilation will sometimes cause the indoor ground and wall condensation to become more serious.

The bathroom door is hand-cranked to prevent the water vapor from spreading to other places in the room. After cooking or showering, remember to bring the kitchen door and toilet door, and open the exhaust fan to reduce moisture into the living room.

Bunk Bed

Bunk Bed,Dormitory Beds,Metal Bunk Beds,Metal Bunker Bed

AU-PINY FURNITURE CO., LTD , https://www.jiangmenaupiny.com