On December 13, the official website of the General Administration of Quality Supervision, Inspection and Quarantine (AQSIQ) notified the nationwide joint supervision and inspection of the quality of five kinds of daily consumer goods such as wooden furniture in 2017. According to the report, in order to strengthen product quality supervision and in-depth efforts to improve the quality of key products, from May to October 2017, the General Administration of Quality Supervision, Inspection and Quarantine organized the quality and technical supervision bureaus (market supervision and management departments) of 30 provinces (autonomous regions and municipalities). The national joint supervision and inspection of the quality of five kinds of daily consumer goods such as bedding, spring soft mattress, children's and infant clothing, wooden furniture and toilet paper. Relevant provincial-level quality and technical supervision bureaus (market supervision and management departments) have organized and completed the tasks of joint supervision and spot checks, and announced the results of random inspections to the public. The relevant information is hereby notified as follows. First, the overall spot check situation The spot check covered 2,784 batches of 2,772 enterprises in 30 provinces (autonomous regions and municipalities) including Beijing, Tianjin and Shanxi (excluding export products). After inspection, 2,582 batches of 2,570 companies were qualified and 202 enterprises were qualified. The 202 batches of products were unqualified, the product qualification rate was 92.7%, and the unqualified product detection rate was 7.3%. Among them, a total of 471 batches of products from 470 enterprises in 22 provinces (autonomous regions and municipalities) were randomly selected. A total of 454 batches of products were found to be qualified, and 17 batches of products were unqualified. The detection rate of unqualified products was 3.6%. A total of 453 batches of 447 companies in 22 provinces (autonomous regions and municipalities) were randomly selected from spring soft mattresses. 420 batches of products were found to be qualified, and 27 batches of products were unqualified. The unqualified product detection rate was 6%. Children and infants and children's clothing were randomly selected from 374 batches of products produced by 374 enterprises in 9 provinces (autonomous regions and municipalities). 314 batches of products were found to be qualified, 60 batches of products were unqualified, and the rate of unqualified products was 16. %; wooden furniture was randomly selected from 989 batches of products produced by 989 enterprises in 22 provinces (autonomous regions and municipalities). It was found that 899 batches of products were qualified, 90 batches of products were unqualified, and the detection rate of unqualified products was 9.1%. The toilet paper collected 497 batches of products from 492 enterprises in 23 provinces (autonomous regions and municipalities). It was found that 489 batches of products were qualified, and 8 batches of products were unqualified. The detection rate of unqualified products was 1.6%. In order to reflect the overall situation of the industry more scientifically, the scope of this joint investigation covers large, medium and small scale types of enterprises. Large enterprises have randomly surveyed 128 batches of 131 products, and 129 batches of products have passed the product qualification rate of 98.5%; medium-sized enterprises have randomly selected 375 batches of 376 batches of products, and 366 batches of products have passed the product qualification rate. It is 97.3%; small enterprises have randomly selected 2,277 batches of 2,269 companies, and 2,087 batches have passed the product, and the product qualification rate is 91.7%. Second, the results of random inspection of wooden furniture wooden furniture. This spot check found that the main problems of unqualified products are woodworking requirements, physical and chemical properties, mechanical properties, and formaldehyde emission levels are not up to standard. After inspection, 34 batches of products were unqualified for woodworking, 29 batches of products were unqualified, and the mechanical properties of 12 batches were unqualified. The formaldehyde emission of 39 batches was unqualified. In the past five years, the national supervised sampling rate of wooden furniture was 84.4%, 82.1%, 82.7%, 88.8% and 90.9% respectively. Third, the sampling situation of wooden furniture area wooden furniture. The spot checks companies mainly concentrated on 377 companies in Jiangsu, Guangdong and Jiangxi provinces, accounting for 38.1% of the total number of companies. No product quality problems were found in the product surveys of the four provinces. The product qualification rate of the five provinces ranged from 95% to 100%, and the product qualification rate of the six provinces ranged from 90% to 95%. The products of the six provinces The pass rate is between 80% and 90%. Fourth, the next work requirements All relevant provincial-level quality and technical supervision bureaus (market supervision and management departments) must conscientiously sum up this joint supervision and spot check work, strengthen the supervision of key product quality in a targeted manner, urge enterprises to implement quality main responsibility, and continuously promote the overall level of product quality. Upgrade. (1) Handling unqualified products and their production enterprises according to law. For this unqualified product and its enterprises, the relevant units must conscientiously complete the spot check and deal with the work. The company is ordered to make corrections within a time limit and strictly review and rectify. (2) Strengthening follow-up supervision and inspection. In view of the outstanding quality problems reflected in this spot check, such as the dry rubbing fastness and fiber content of bedding products, the items such as bedding, spring and durability of spring soft mattress are not qualified, children and The formaldehyde content and pH value of infant and children's clothing are unqualified, the woodworking requirements, physical and chemical properties of wooden furniture are unqualified, the softness and dustiness of toilet paper are unqualified, and follow-up supervision of relevant enterprises should be intensified. Check the strength. (3) To timely report the relevant situation. The local government and relevant departments shall be promptly notified of the unqualified inspections, and effective measures shall be taken to urge enterprises to implement the main responsibility of product quality and safety according to law, and guide enterprises to organize production in strict accordance with standards to effectively maintain product quality and safety. Standard swing door cabinets is a model to your office.
The standard feature of tall swing door cupboards are higed doors, 3-point locking system, and 2 to 4 adjustable shelves,and people also call them hinged door cabinets.
Black Metal Storage Cabinet,4 Shelf Metal Cabinet,Swing Cabinet for Sale LUOYANG SHIDIU IMPORT AND EXPORT CO., LTD , https://www.shadowcabinete.com
They are made from high quality cold-rolled steel,all metal parts are phosphatised against rust and powder coated in different colors.
Full Height Swing Door Cupboard are suitable for general purpose in office, work places, home storage,keeping anything from office stationery to garage tools.
Height 1850, 1200, 900 (mm)
Width 850, 900 (mm)
Depth 390, 400 (mm)
You always can get more choices in a manufacturer, sometimes two door storage cupboard with drawers are requested.
AQSIQ: 989 batches of wooden furniture failed the sampling rate of 9.1%